Siemens ECO1-110/2 Reference Manual Download Page 7

Page: 7 / 137

ECO REFERENCE MANUAL

2-1

INTRODUCTION

PRODUCT DESCRIPTION AND
APPLICATIONS

The MICROMASTER Eco and MIDIMASTER Eco

provides a range of variable frequency speed

controllers (inverters) specifically developed for

the Heating, Ventilation & Air Conditioning

(HVAC) industry.

Key design features include:

•

Automatic energy optimisation

•

Motor thermal overload protection

•

Automatic switching frequency optimisation for

minimised acoustic noise generation

•

Zero de-rating of motor

•

Automatic motor tuning at switch-on

•

Earth fault protection

•

Short circuit protection

•

Built-in chokes allow use of up to 150 metre

motor cables

The ability to easily control the speed of pump or

fan motors provides superior regulation and

control of the process, enabling optimisation of

room temperatures and personal comfort levels.

The Eco range combines ease of installation and

commissioning with low maintenance and

operating costs. In addition, the specific HVAC

product functionality (compared with similar

products aimed at “Hi-Tech” multiple applications)

means that product costs can be minimised, and

the user does not pay for features which are not

required.

Day-to-day operating costs can be drastically

reduced - up to 60% in some applications. Energy

consumption and associated emissions are also

reduced to the lowest possible levels.

ECO OPERATING INSTRUCTION
MANUAL

The Eco Operating Instructions booklet (which

should be read in conjunction with this manual)

provides basic information on equipment

installation and programming, to control the

functions of fans and pump motors. It is aimed at

HVAC Installation Technicians and Electricians

working and commissioning on-site, and is

intended to provide a quick, straightforward guide

to installing and simple operating of the Eco units.

ECO REFERENCE MANUAL

This Manual - The Eco Reference Manual is

intended for use by a wide range of HVAC

professionals. For example, the Eco Reference

Manual is to be used by Building Automation

Engineers to plan their equipment and cabling

schedules and estimate their material

requirements. It may also be used by HVAC

Consultants in order to compile the relevant

portions of their tender specification.

The Eco Reference Manual should also be useful

to electrical panel builders, building automation

control engineers, quantity surveyors / estimators,

electrical project managers, and maintenance

contractors.

Summary of Contents for ECO1-110/2










































































































































Search results

Summary of Contents for ECO1-110/2

Reviews:

Related manuals for ECO1-110/2

Brands by name

Popular brands

Siemens ECO1-110/2, Reference Manual

Search results

Summary of Contents for ECO1-110/2

Reviews:

Related manuals for ECO1-110/2

Brands by name

Popular brands