Siemens ECO1-110/2 Reference Manual Download Page 98

Page: 98 / 137

ECO REFERENCE MANUAL

15-1

15.

OPTIONS

The MICROMASTER Eco and MIDIMASTER Eco can be enhanced by a range of specially designed

options, with various IP ratings:

Accessory

IP Rating

Availability

MICROMASTER

Eco

MIDIMASTER

Eco

Multilingual Clear Text Operator Panel OPe

IP54

Yes

Standard

EMC Filter for EN55011A

IP21

Standard (1phase)

Footprint (3 phase)

Integrated

EMC Filter for EN55011B

IP20

Footprint

External

Motor Chokes for long motor cables

IP00

Yes

Motor dV/dt filters

IP00

Yes

Mains input reactors

IP00

Yes

These options are described separately below.

CLEAR TEXT OPERATING PANEL OPe

The clear text operating panel consists of a

control and display unit that fits directly on top of

the MICROMASTER Eco or MIDIMASTER Eco

Control panel. A D-Type socket connects directly

onto the D-type connector on the front of the unit

so that the OPe can take power from and

communicate with the drive via the RS485

interface.

The OPe offers the following features:

•

Seven language ( English, German, French,

Italian, Spanish, Dutch, Danish) text operation

with explanation of parameters, faults etc.

•

Diagnostics - help with fault finding.

•

Upread/download up to 10 parameter sets

from units to OPe and back. This allows fast,

reliable programming and copying of

parameter sets.

•

OPe mounts directly on MICROMASTER Eco

and MIDIMASTER Eco.

•

Door mounting kit with IP54 protection

included.

•

Built in RS232 to RS485 Converter for simple

connection to computer.

•

External supply connector for remote

operation and off line programming.

•

The OPe has several practical uses; for

example:

•

The OPe may be mounted directly onto the

inverter and used to control the drive directly.

•

The OPe can be mounted on a separate panel

(using an optional cable of up to 5m) to

enable remote control and monitoring of the

drive.

•

If an external power supply is connected to the

OPe, remote control over distances greater

than 5m is permissible

•

The built in RS232 to RS485 connector can be

used to allow communication between a PC

and the drive.

•

Parameter sets can be stored in the OPe and

uploaded or downloaded as required. This is

particularly useful where many inverters

require programming in production.

Summary of Contents for ECO1-110/2










































































































































Search results

Summary of Contents for ECO1-110/2

Reviews:

Related manuals for ECO1-110/2

Brands by name

Popular brands

Siemens ECO1-110/2, Reference Manual

Search results

Summary of Contents for ECO1-110/2

Reviews:

Related manuals for ECO1-110/2

Brands by name

Popular brands