Siemens DCA Vantage, Operator'S Manual, Page: 94 / 214

DCA Vantage Operator’s Guide 94
Qua
lit
y Cont
rol
Q
u
al
it
y C
o
nt
rol
6. At the Control Test Reminder screen, select 1 of the following:
• HbA
1c
Normal
• HbA
1c
Abnormal
• A/C Low
• A/C High
Once selected, the Schedule button to the right of the control test selected
becomes active.
7. Select
Schedule
for the selected test.
8. Select Change .
9. Select
Optional
or
Required
, and then select
Next
.
10. Select Custom .
A screen displays that enables you to select a number between 7 and 60
by pressing up or down arrow keys. The selected number displays above
the arrow keys. The default value is 14.
Both up and down arrow keys cycle continuously through the 7 to 60
number range. For example, if 7 displays, pressing the down arrow key
displays 60. Press the down arrow again to display 59, then 58, and so on.
11. Press an arrow key until the number you want displays.
12. Select Next .
13. Select the time in hours and minutes, using the arrow keys.
14. Select AM or PM .
15. Select
Next
.
The Settings screen displays. Verify the settings you entered are correct. If
a setting is incorrect, select
Change , and update the settings, as needed.
16. Select
Save
.
The Control Test Reminders screen displays.
17. Repeat steps 6 to 16 to set additional QC reminders, as needed.