Siemens CP 1542SP-1 Operating Instructions Manual Download Page 13

Page: 13 / 118

CP 154xSP-1
Operating Instructions, 12/2019, C79000-G8976-C426-05

Application and functions

1.1

Components of the product

The following components are supplied with the product:

●

CP 154xSP-1

●

Plug for the socket of the power supply (24VDC) of the CP

●

DVD with documentation and license texts

A BusAdapter for the Ethernet connection of the CP does not ship with the product.

1.2

Application

Application of the CP variants

The CP is used to connect the ET 200SP to Industrial Ethernet via a copper cable or fiber-

optic cable. It can be used as an additional Ethernet interface of the CPU for S7

communication.
For the Ethernet connection, the CP requires a BusAdapter. The BusAdapter is not supplied

with the CP. For information on the compatible BusAdapters, refer to the section BusAdapter

(Page 109).
The three CP types are intended for the following communication tasks:

●

CP 1542SP-1
The CP 1542SP-1 allows the ET 200SP a further Ethernet connection.

●

CP 1543SP-1
The CP 1543SP-1 has Security functions for network security, such as a firewall and

VPN. This makes protected access to the ET 200SP possible.

Summary of Contents for CP 1542SP-1























































































































Search results

Summary of Contents for CP 1542SP-1

Reviews:

Related manuals for CP 1542SP-1

Brands by name

Popular brands

Siemens CP 1542SP-1, Operating Instructions Manual

Search results

Summary of Contents for CP 1542SP-1

Reviews:

Related manuals for CP 1542SP-1

Brands by name

Popular brands