Application and functions
1.9 Requirements for use
CP 154xSP-1
Operating Instructions, 12/2019, C79000-G8976-C426-05
27
1.9
Requirements for use
1.9.1
Hardware requirements
Bus adapter
To connect to the Ethernet network, the CP requires a BusAdapter. A BusAdapter does not
ship with the CP.
The CP supports the following BusAdapter:
●
BA 2xRJ45
●
BA 2xFC
●
BA 2xSCRJ
●
BA SCRJ/RJ45
●
BA SCRJ/FC
You can find further details on the BusAdapters in the appendix BusAdapter (Page 109) and
CPUs and other components of the ET 200SP
The CP supports operation in stations that contain one of the following CPUs:
●
CPU 1510SP-1 PN
Article number: 6ES7510-1DJ01-0AB0
●
CPU 1510SP F-1 PN
Article number: 6ES7510-1SJ01-0AB0
●
CPU 1512SP-1 PN
Article number: 6ES7512-1DK01-0AB0
●
CPU 1512SP F-1 PN
Article number: 6ES7512-1SK01-0AB0
Further parts and modules that are also required to set up the ET 200SP station, such as
rails, I/O modules or cabling are not listed here. See also /3/ (Page 114) for information on
this.
Components of the communications partner
Components required by the communications partners of the CP 1542SP-1 IRC are not
listed here. You will find references to other products (e.g. TCSB) in the list of references in
the appendix of the manual.
