CP 1242-7 V2
Operating Instructions, 05/2014, C79000-G8976-C311-00
57
Approvals
B
Approvals issued
Note
Issued approvals on the type plate of the device
The specified approvals apply only when the corresponding mark is printed on the product.
You can check which of the following approvals have been granted for your product by the
markings on the type plate.
National approvals
You will find an overview of the country-specific wireless approvals of SIMATIC NET devices
with GSM or UMTS services on the Internet pages of Siemens Automation Customer
Support. You will find the link to the document on the following page:
ik-Info (
www.siemens.com/simatic-net/ik-info
)
Other approvals
SIMATIC NET products are regularly submitted to the relevant authorities and approval
centers for approvals relating to specific markets and applications.
If you require a list of the current approvals for individual devices, consult your Siemens
contact or check the Internet pages of Siemens Automation Customer Support:
45605894 (
http://support.automation.siemens.com/WW/view/en/45605894
)
Under this entry, go to the relevant product and select the following settings: "Entry list" tab >
entry type "Certificates".
Approvals for SIMATIC NET products
You will find an overview of the approvals for SIMATIC NET products including approvals for
shipbuilding on the Internet pages of Siemens Automation Customer Support under the
following entry ID:
57337426 (
http://support.automation.siemens.com/WW/view/en/57337426
)
EC declaration of conformity
The CP meets the requirements and safety objectives of the following EU directives and it
complies with the harmonized European standards (EN) for programmable logic controllers
which are published in the official documentation of the European Union.