Siemens CP 1242-7 GPRS V2 Operating Instructions Manual Download Page 5

Page: 5 / 72

Preface

CP 1242-7 V2
Operating Instructions, 05/2014, C79000-G8976-C311-00

License conditions

Note
Open source software
Read the license conditions for open source software carefully before using the product. The

acceptance of the disclaimers of liability and warranty it contains is a clear precondition of

the use of open source software.
You will find license conditions in the document "DOC_OSS-S7-CM-CP_74.pdf" on the

supplied data medium with the product documentation.

Security information

Siemens provides automation and drive products with industrial security functions that

support the secure operation of plants or machines. They are an important component in a

holistic industrial security concept. With this in mind, our products undergo continuous

development. We therefore recommend that you keep yourself informed with respect to our

product updates. Please find further information and newsletters on this subject at:

http://support.automation.siemens.com.
To ensure the secure operation of a plant or machine it is also necessary to take suitable

preventive action (e.g. cell protection concept) and to integrate the automation and drive

components into a state-of-the-art holistic industrial security concept for the entire plant or

machine. Any third-party products that may be in use must also be taken into account.

Please find further information at: http://www.siemens.com/industrialsecurity

SIMATIC NET glossary

Explanations of the specialist terms used in this documentation can be found in the SIMATIC

NET glossary.
You will find the SIMATIC NET glossary here:

SIMATIC NET Manual Collection
The DVD ships with certain SIMATIC NET products.

On the Internet under the following entry ID:
50305045 (

http://support.automation.siemens.com/WW/view/en/50305045

)

Service & Support

In addition to the product documentation, the comprehensive online information platform of

Siemens Automation Customer Support supports at any time and at any location in the

world. You will find the Service & Support pages on the Internet at the following address:

http://support.automation.siemens.com/WW/llisapi.dll?func=cslib.csinfo2&aktprim=99&lang=en

Apart from news, you will also find the following information there:

Product information, Product Support, Applications & Tools

Technical Forum

Summary of Contents for CP 1242-7 GPRS V2









































































Search results

Summary of Contents for CP 1242-7 GPRS V2

Reviews:

Related manuals for CP 1242-7 GPRS V2

Brands by name

Popular brands

Siemens CP 1242-7 GPRS V2, Operating Instructions Manual

Search results

Summary of Contents for CP 1242-7 GPRS V2

Reviews:

Related manuals for CP 1242-7 GPRS V2

Brands by name

Popular brands