Connect external components
Fire brigade call station (AT) PT2002-A1
7
A6V10430579_en--_b
141 | 173
7.4.4 Connect PACE-Net Ethernet
The PT2002-A1 provides 2 Ethernet sockets at the PT2001-A1 mother board.
Always connect port A (ETH A) with an Ethernet switch.
A redundant Ethernet connection can also be established by connecting socket
port B (ETH B) with an Ethernet switch. It can be the same switch or, for higher
redundancy, another Ethernet switch in the system. If the connection on port A
fails, the PT2002-A1 uses automatically port B for the communication.
7.4.5 Analog audio inputs
The PT2002-A1 provides 2 analog audio inputs:
● Analog audio input 1 is used for the attached handheld microphone.
● Analog audio input 2 can be used for other audio sources.
Analog audio input 1 and 2 connector - 'CN1'
Pin
Description
Remark
1
GND
GND reference voltage
2
-
3
Signal -
-
Table 110: PT2002-A1 analog audio input 1 and 2 connector - 'CN1'
7.4.6 Analog audio outputs
The PT2002-A1 provides 2 analog audio outputs:
● Analog audio output 1 is used for the mounted speaker.
● Analog audio output 2 can be used for other audio components.
Analog audio output 1 and 2 connector - 'CN5'
Pin
Description
Remark
1
GND
GND reference voltage
2
-
3
Signal -
-
Table 111: PT2002-A1 analog audio output 1 and 2 connector - 'CN5'