Safety
8
Siemens Building Technologies
Fire Safety & Security Products
04.2006
2 Safety
2.1 Intended
use
The IP camera is used in indoor areas for showing live images via a network.
It is not to be used outdoors nor in the protective housing.
2.2 Target
Group
Target Group
Qualification
Activity
Unit Condition
Start-up personnel
Appropriate
professional training
regarding the function
and units or systems to
be brought into
operation.
Start-up personnel bring
the unit or system which
has been installed into
operation on-site.
New, installed, rebuilt
unit or system with
malfunction.
2.3 General
safety
precautions
z
Read the general safety precautions before operating the unit.
z
Keep this document available for reference.
z
If the product is pasdsed on to another party, include this document.
z
Installation, operational start-up, configuration and repairs should only be
performed by qualified personnel.
See Section 2.2 Target Group.
z
Burn hazard
–
Do not touch the housing of the unit while it is in operation.
z
Overheating hazard
–
During installation and operation, ensure that there is sufficient air circulation
for the IP camera to prevent heat build-up.
–
Do not use the IP camera in the protective housing.
z
Electric shock hazard
–
Operate the IP camera only with the specified voltage.
–
If any liquid or solid matter should get into the housing, disconnect the camera
from the power supply and have it checked by an authorized dealer before
using it again.
–
Do not make unpermitted modifications to the unit. Changes lead to a loss of
operating privileges for this unit.
z
Malfunctions
–
The unit generates, uses and can emit radiofrequency energy. If not installed
and used according to instructions, interference with radio and television
reception may result.
