Assembly and setup
23
Siemens Building Technologies
Fire Safety & Security Products
04.2006
–
The factory setting for the focal lenth (back focus) is for a CS-mount lens (as
delivered).
8.1.1
Setting the focal length
1.
Loosen the back focus lock screw (
2
).
2.
Set the IP camera to the back focus operating mode. See
Section 10.5.7 Service configuration.
Î
The lens aperture opens completely.
3.
Turn the back focus dial (
1
) until the image is in focus.
4.
Tighten the screw (
2
) again carefully.
5.
Connect the IP camera to the network using a network cable connected to the
RJ-45 network jack (
10
).
