Configuration
31
Siemens Building Technologies
Fire Safety & Security Products
04.2006
10.3.2 Changing the IP address using the Web-Cam IP Manager
NOTE
You may only change the device IP address in the first 20 minutes after the unit has started.
This assumes that:
The Web-Cam IP Manager and all the devices are located in the same network
segment. If a device and the Web-Cam IP Manager are not located in the same
network segment, you must ensure that associated
gateway
(router) passes the
SSDP multicast messages sent by the Web-Cam IP Manager to the network
segment where the device is located.
–
SSDP (Simple Service Discovery Protocol / network protocol)
1.
Start the Web-Cam IP Manager by loading
IP Manager.exe
. This application
is found on the CD included with delivery.
Î
The Web-Cam IP Manager program window will open:
2.
Click the
Start
button.
Î
The Web-Cam IP Manager program window will now display a list of all the
devices available for communication along with their IP addresses and MAC
addresses (printed on the underside of the device).
Each device's IP address or MAC address is unique.
3.
Select the device whose IP address you want to change.
4.
Click the
Set IP Address
button
.
Î
The following dialog appears:
