Configuration
44
Siemens Building Technologies
Fire Safety & Security Products
04.2006
Alarm function
The following options are available:
z
OFF
The “alarm in” function on the back side is deactivated.
z
ON
The “alarm in” function on the back side is activated.
After resetting the alarm, the alarm will continue to be displayed on the
IP camera for approximately 30 seconds.
Alarm text
This text is displayed in the event of an alarm and can be displayed on
an analog monitor in addition to display in a browser window.
Enter a text here, which is to appear on the live image in addition to
the ID text. See Section 10.5.5 Entering and positioning the ID text.
z
Text length
Max. 20 characters
z
Allowed characters
Use only the following characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789 : < > - . , ; * / SPACE
NOTE
Lower case letters are converted to upper case.
Any unpermitted characters are replaced by a period.
4.
Click
Save
.
10.6 Setting the date and time
1.
Open the unit’s home page. See Section 7.4 Accessing the unit’s home page.
2.
Select
Date and Time
in the
Configuration
menu.
Î
The
Date and Time
dialog will appear:
Fig. 14
Date and time
Î
The time and date that were current when the device start page was loaded
appear in the relevant fields.
You can set the device's built-in real-time clock here.
3.
Choose the desired settings from the dropdown list for each field.
4.
Click
Save
.
10.7 Configuring user names and passwords
You can define user names and passwords for device configuration and image
access (live image access rights).
