Unit description
18
Siemens Building Technologies
Fire Safety & Security Products
04.2006
7.4
Accessing the unit’s home page
There are two ways of accessing the unit’s home page:
z
Using
Internet Explorer
z
Using the
Web-Cam IP Manager
7.4.1
Accessing the unit’s home page with Microsoft Internet Explorer
1.
Type the IP address that is allocated to the device in the HTTP address field
of Internet Explorer. See Section 10.3 Changing the device IP address.
For example: http://192.168.100.100/
2.
Confirm with the Enter
key.
Î
The unit’s home page will be displayed.
7.4.2
Accessing the unit’s home page with the Web-Cam IP Manager
This assumes that:
The Web-Cam IP Manager and all the units are located in the same network
segment. If a device and the Web-Cam IP Manager are not located in the same
network segment, you must ensure that associated
gateway
(router) passes the
SSDP multicast messages sent by the Web-Cam IP Manager to the network
segment where the device is located.
–
SSDP (Simple Service Discovery Protocol / network protocol)
1.
Start the Web-Cam IP Manager by loading
IP Manager.exe
. This application
is found on the CD included with delivery.
Î
The Web-Cam IP Manager program window will open:
