Siemens APACS+ Installation And Service Instruction Download Page 13

Page: 13 / 65

SD39EAM-1r4

Introduction

September 2005

1-3

A&D Technical Support

Worldwide, available 24 hours a day:

Beijing

Nürnberg

Johnson City

United States

: Johnson City, TN

Worldwide:

Nürnberg

Asia

Australia

: Beijing

Technical Support

24 hours a day, 365 days a year

Phone:+49 (180) 5050-222

Fax:+49 (180) 5050-223

E-Mail:

[email protected]

GMT:+1:00

Technical Support and Authorization

Local time: Monday to Friday

8:00 AM to 5:00 PM

Tel1 (423) 262 2522

or +1 (800) 333-7421 (USA only)

Fax:+1 (423) 262 2289

Mail to:

[email protected]

GMT: -5:00

Authorization

Local time: Monday to Friday

8:00 AM to 5:00 PM

Phone: +49 (180) 5050-222

Fax: +49 (180) 5050-223

Mail to:

[email protected]

GMT: +1:00

Technical Support and Authorization

Local time: Monday to Friday

8:00 AM to 5:00 PM

Phone:+86 10 64 75 75 75

Fax:+86 10 64 74 74 74

Mail to:

[email protected]

GMT:+8:00

Automation and Drives Service and Support International

http://www.siemens.com/automation/service&support

The languages of the SIMATIC Hotlines and the authorization hotline are generally German and English.

Summary of Contents for APACS+


































































Search results

Summary of Contents for APACS+

Reviews:

Related manuals for APACS+

Brands by name

Popular brands

Siemens APACS+, Installation And Service Instruction

Search results

Summary of Contents for APACS+

Reviews:

Related manuals for APACS+

Brands by name

Popular brands