Siemens APACS+ Installation And Service Instruction Download Page 12 | Manualshive

Page: 12 / 65

background image

Introduction

SD39EAM-1r4

1-2

September 2005

The APACS+ architecture provides for rack-to-rack redundancy, where the redundant rack completely
duplicates the control and I/O modules of the primary rack. Both racks share common I/O terminations at
the Marshalled Termination Assembly via Interconnect I/O Cables.

1.2 Product

Support

Our Technical Support Centers (TSC) offer a variety of technical support services that are designed to
assist you with Siemens products and systems. Our support engineers have experience with
troubleshooting, development, system startup, and system test. They will help you to solve your issues in
an efficient and professional manner.

Customers in North America can contact Siemens Technical Support Center at 1-800-333-7421, on the
web at:

http://support.automation.siemens.com

, or by e-mail:

[email protected]

Customers outside North America can contact their local Siemens subsidiary; addresses and telephone
numbers are listed on the Internet at the web site:

http://support.automation.siemens.com

.

When contacting Siemens, customers will be asked to provide site-contact information (name, address,
and phone number), the product involved and detailed information regarding the nature of the issue.

Product documentation is now located in the Library forum of the Process Automation User Connection
at:

http://sitescape.sea.siemens.com/

. The Process Automation User Connection is a secure site.

Registration is open to all verified users of Siemens process automation systems. If you are not already,
and would like to become a member, please visit our Process Automation User Connection web page at:

http://www.sea.siemens.com/process/support/papauc.html

Contained within the Process Automation User Connection is the APACS+/QUADLOG Secure Site at:

http://sitescape.sea.siemens.com/forum/aca-1/dispatch.cgi/f.apacsquadlo

forum. This site is only open to

customers with an active service agreement. It contains all service manuals, service memos, service notes,
configuration manuals, etc. for the APACS+ and QUADLOG family of products. If you are experiencing
technical difficulties with the site, please contact SiteScape technical support at: toll free 1-877-234-1122
(US) or 1-513-336-1474.

«
...
10
11
12
13
14
...
»

Summary of Contents for APACS+


































































Reviews:

No comments

Related manuals for APACS+

Brand: N-Com Pages: 2

Brand: CAME Pages: 32

Brand: Jensen Pages: 12

Brand: Kärcher Pages: 60

Brand: Omega Pages: 44

Brand: WAREMA Pages: 112

WAGO-I/O-SYSTEM 750 XTR Series

Brand: WAGO Pages: 272

Brand: WAGO Pages: 450

Bell & Gossett ecocirc XL Series

Brand: Xylem Pages: 62

Brand: GE Pages: 28

Call Assistant CA48

Brand: AT&T Pages: 3

Brand: BERNSTEIN Pages: 52

Brand: DAB Pages: 228

Brand: Medion Pages: 122

Brand: Commax Pages: 8

Brand: WAGO Pages: 30

Brand: M-system Pages: 7

AC AUTO STOP GEN 2

Brand: Lift Tech Marine Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands