Siemens 7MF4033 series, User Manual

Page: 44 / 222

Model 275 Universal Hart Communicator UMSITRPDS3-1
November 2010
2-22
2.5.4.2 System Information
From the Utility menu, press “2” to access the System
Information menu (at right). This menu can be used to provide
information on the motherboard (e.g., firmware revision
number), the module hardware and software characteristics, and
the Data Pack EEPROM.
2.5.4.3 Listen for PC
Not implemented in firmware release 1.6.
2.5.4.4 Storage Location
From the Utility menu, the Storage Location menu (at right)
provides access to data concerning the Memory Module or the
Data Pack. Information available through this menu includes a
label for the Memory Module or Data Pack, a feature that
displays the total storage used (bytes) and the storage remaining
(“free” bytes). The PC selection is not implemented in firmware
release 1.6.
2.5.4.5 Simulation
The HART Communicator provides a mode that allows users to
simulate an on-line connection to a HART-compatible device
without connecting to the device. The simulation mode is a
training tool that allows users to become familiar with different
devices before configuring them in a critical environment.
Simulation of an on-line connection is done by selecting a
manufacturer from the Manufacturer menu, then selecting a
device from the Model menu, just as is done when on-line. After
selecting a software revision, the Online menu for the simulated
device is displayed. Functions are the same as those available
when on-line.
2.5.4.6 Selftest
Selftest performs a test of the Communicator.
HART Communicator
System Information
"
1->Motherboard
2 Module
3 Data Pack
HELP|DEL |ESC |ENTER
HART Communicator
Storage location
"
1->Module
2 Data Pack
3 PC
HELP|DEL |ESC |ENTER