Siemens Nixdorf PCD-B series, Operating Manual

Page: 67 / 137

Data protection System operation
Press key F10.
The following message will be displayed:
<PRESS F5 TO CONFIRM UPDATE>
Press key F5.
The following message will then be displayed:
Type New Password and Press ENTER Key:
SETUP
O
A password must be 4 to 8 characters in length and may include all alphanumeric
i
characters. No distinction is made between upper and lower case.
Enter the SETUP password .
Press the Enter key.
The following message will then be displayed:
Verify Password and Press ENTER Key:
O
Enter the SETUP password again as confirmation.
Press the Enter key.
You have now assigned the SETUP password, and the PC restarts.
Assigning the SETUP and SYSTEM passwords
Restart your PC (Warm boot, reset or switching off/on).
The following message will then be displayed briefly:
<PRESS CTRL-ALT-INS FOR SETUP>
While this message is on the screen, press the key combination Ctrl, Alt and Ins.
If a SETUP password has already been assigned, the following message will
i
appear:
Type password and Press ENTER Key
:
O
Enter the SETUP password.
Press the Enter key.
The first page of the SETUP menu will then be displayed.
A26361-K293-Z1-1-7619
61