Important notes
In this chapter you will find information regarding safety which it is essential to take note
of with your PC. The chapter also contains information on the licenses issued for your
equipment.
Safety
This PC complies with the requirements of IEC and VDE for data processing equipment
and with the "Safety Regulations for Visual Display Units in Workplaces in Office
Premises" (ZH1/618).
– The PC must be installed in accordance with the environmental conditions and the
technical data specified in the relevant chapters of the Operating Manual.
–
Please check whether the PC is set to the local power supply.
– This PC has a safety-tested power cable and may only be connected to a properly
grounded plug socket.
– The PC must be installed in such a way that the user has good access to the appliance
socket (fully insulated socket) or the grounded-contact utility power socket.
– Lay all cables so that nobody can stand on them or trip over them.
– No cable should be connected or disconnected during a thunderstorm.
– To ensure complete isolation from the ac power supply (e.g. in emergencies or before
the PC is opened), the PC must be disconnected by pulling the power plug.
– Repairs may only be made by qualified technicians.
– Do not open the power supply (identified by a label). Only qualified personnel is
allowed to remove it.
8
A26361-K293-Z1-1-7619
Summary of Contents for PCD-B series
