Siel SOLEIL 3F-TL10K, Installation And Operation Manual

Page: 95 / 277

IV351 Rev04
Date Issue 2015-04-21
Page 95 di 277 + FR
1. Safety Instructions
Risk of Electric Shock:
Alternating Current (AC) and Direct Current (DC) sources are terminated in this device.
To prevent risk of electric shock during maintenance or installation please ensure that all
AC and DC terminals are disconnected. Be sure to secure the Ground line to the Grid’s
Ground, and double check the Line and Neutral are not confused with Ground.
Risk of Electric Shock:
When PV module or panel is exposed to light, it starts to supply high DC voltage, be sure
to turn off DC switch before servicing, or make sure no live part will be touched.
Risk of Electric Shock:
Warning - High leakage current, earth connection is essential before connecting to the
utility.
Risk of Electric Shock:
More than one source of supply. Disconnect all sources before servicing.
CAUTION :
After disconnecting the PV inverter from the power supply and PV modules, electrical
charge can still reside in the DC link capacitors. Before handling the device, please allow
at least 1 minute after the power is disconnected.
Public Utility only:
The PV inverter is designed to feed AC power directly to the public utility power
grid. Do not connect the AC-output of this device to any private AC equipment.
Hot Surfaces:
Although designed to meet international safety standards, the PV inverter can become hot
during operation. Do not touch the heat sink or peripheral surfaces during or shortly after
operation.
Maintaining and Servicing PV inverter:
Only authorized personnel are allowed to open the Inverter for service purpose.
CAUTION :
Risk of electric shock from energy stored in capacitor, do not remove cover
until 2 minutes after disconnecting all sources of power supply.
Unpacking and Installation:
Some certain models of the SIEL grid-tied PV inverter may weighs up to 57kg (125.7lbs).
To avoid injury and for safety purpose, be sure to use proper lifting techniques and secure
the help of someone to assist in the unpacking and installation of the Inverter.
C
AUTION:
If the equipment is used in a manner not specified by the manufacturer, the protection
provided by the equipment may be impaired.