Siel SOLEIL 3F-TL10K, Installation And Operation Manual

Page: 113 / 277

IV351 Rev04
Date Issue 2015-04-21
Page 113 di 277 + FR
Important Reminder:
In Normal operation, all the AC cables (L1-Phase
ᇬ
L2-Phase
ᇬ
L3-Phase
ᇬ
N-Phase and G-Phase) need to be connected firmly in the AC terminal of PV
inverter before AC power turn on, please beware.
When the AC utility is required to be disconnected from the PV inverter, DC
power of PV inverter has to be turned off firstly. And then disconnected the AC
power ( L1-Phase
ᇬ
L2-Phase
ᇬ
L3-Phase and N-Phase) of PV inverter at the same
time in order to protect the PV inverter itself.
If user fails to comply with the above Important Reminder, PV inverter and the
connected equipment will be damaged.
8. Fix the AC output cover back with a screwdriver.
9. Twist the connector cable gland to lock the bushing and cable together firmly.
10. Check the installation condition again.
9
Do not install the PV inverter on a slanted surface
9
Check Inverter are securely hooked on bracket at both of upper and lower sides.