Siel SOLEIL 3F-TL10K, Installation And Operation Manual, Page: 122 / 277

IV351 Rev04
Date Issue 2015-04-21
Page 122 di 277 + FR
Regulation Setting OK
Press any button
Note:
Incorrect regulation type setting would result in improper behaviors, please consult
with the supplier in case of unfamiliarity with regulatory selection and setting.
6.3 Operating Modes
There are 4 modes of operation. For each mode, there is a corresponding color and text to
indicate the status.
(6) Normal
In this mode, Inverter continuously converts energy from solar generator to grid (utility).
The corresponding color of LCD is green in this case.
Pac:7494W
Vdc:403/420V
Vac:230.5/232.3/231.1V
Iac:10.5/11.2/10.7A
Status:Normal
21.04.12 15 :01
(7) Recovery from Fault
In some situations such as abnormal voltage and frequency, the Inverter has to
disconnect from grid. After the situations are cleared, Inverter recovers to normal
condition. For the coming 48 hours, the LCD backlight will be yellow as following
picture. If there is no further abnormal event after 48 hours of operation, the color
switches back to green again.
Pac:7494W
Vdc:403/420V
Vac:230.5/232.3/231.1V
Iac:10.5/11.2/10.7A
Status:Normal
21.04.12 15 :01
(8) During Fault
During grid fault or system failure (refer to “error message table” for further
information) the Inverter disconnects from the grid, the backlight turns red, and alarm is
ON to notify user. User can press “OK” button on navigation pad to clear fault
notification. In this condition, please check the message. If the fault notification cannot