Siel SOLEIL 3F-TL10K, Installation And Operation Manual, Page: 146 / 277

IV351 Rev04
Date Issue 2015-04-21
Page 146 di 277 + FR
Link LED is used to indicate the availability of connection from the RJ45 port. That means
when there is an Ethernet cable inserted in any RJ-45 ports, link LED will be lighted in
yellow and blink in 2Hz during signal transferring. The following table is indicated the pin
dentitions for the RS45 ports of RS485.
RS485 Wiring Notification
DC Power exists on the socket. Pin 7 and Pin 8 of RJ45 port is used for the DC
powered. It is important to make sure “do not connect other devices to this port”. It
may damage your devices.
PIN NAME Voltage
1 Tx+
s
400mVp-p~
s
15Vp-p
2 Tx-
3 Rx+ 400mVp-p~ 15Vp-p
4
GND
5 GND
6 Rx-
400mVp-p~ 15Vp-p
7
VCC
11V~12V
8 VCC
1
8
8 pin RJ-45 (8P8C)