54
8011703/XF49/2019-09| SICK
O P E R A T I N G I N S T R U C T I O N S | VICOTEC320
Subject to change without notice
9
MAINTENANCE
4
Loosen the plug of the LED unit's (3) power supply connection.
5
Loosen the two screws (5 mm Allen screw) on the sender lamp and take the sender lamp
off
.
6
Remove the cap from the new sender lamp.
7
Plug in new sender lamp and screw tight.
8
Connect the plug (1) and screw tight.
9
Insert plug (3).
10
Screw the rear cover tight.
Adjustment is not required.
Note:
Risk of contamination of the optical mirrors after removing the sender lamp.
▸
Cover the opening to the optical mirrors after removing the sender lamp.
Note:
Reset the lamp hour meter (Maintenance > Lamp hour meter) after exchanging the light
source.
