manualshive.com logo in svg

SICK TIM3xx, Technical Information

Share
Download
SICK TIM3xx Technical Information Download Page 4

Chapter 

1

Techncial Information

TiM3xx Detecting Laser Scanner

4

© SICK AG · Germany · All rights reserved · Subject to change without notice

8014318/YK97/2015-04-27

About this document

Safety information

Mounting and connection must only be performed by specialist stuff.

Read the notes on mounting and electrical installation before carrying out these tasks. 

Read additionally the TiM3xx operating instructions to familiarize yourself with the 
device and its functions.

Only use the device in permissible ambient conditions (e.g. temperature, ground poten-
tial). Any applicable legal regulations or regulations of other authorities will have to be 
observed during operation.

Opening the screws of the TiM3xx housing will invalidate any warranty claims against 
SICK AG.

Repairs may only be performed on the TiM3xx by trained and authorized SICK AG ser-
vice personnel.

The TiM3xx does not constitute personal protection equipment in sense of the respec-
tive applicable safety standards for machines.

Summary of Contents for TIM3xx



































Reviews:

No comments

Brands by name

Popular brands

Load more brands