Technical Information
Chapter
3
TiM3xx
Mounting
8014318/YK97/2015-04-27
© SICK AG · Germany · All rights reserved · Subject to change without notice
13
3.2.2
Install mounting set 2 (part no. 2068398) on the TiM35x/TiM36x
The hanger-shaped mounting set 2 is used as skirting protection and as a bracket for mak-
ing fine adjustments on the scan plane. The TiM35x/TiM36x can also be fastened directly
onto the bracket without the adapter plate (skirting protection only).
Mounting bracket
Hole for mounting the weatherproof housing, 3 x
Holes for mounting the spacer (for mounting weatherproof housing), 3 x
Hole for horizontal or vertical mounting of the mounting bracket on a base, 2 x 2
M4 x 16 cylinder head screw (hexagon socket) and compression spring for aligning the
TiM35x/TiM36x, 3 x
Stud for locking the adapter plate after alignment, 2 x
Adapter plate
M3 x 8 cylinder head screw in
3.2 mm hole for mounting the TiM35x/TiM36x on the
adapter plate, 2 x
Hole for mounting the TiM35x/TiM36x directly on the mounting bracket, 2 x
(alternatively, without the option of adjusting the scan level)
