O P E R A T I N G I N S T R U C T I O N S | T - E A S I C
®
8023072/1E22/2022-02-23| SICK AG
Subject to change without notice
1 7
5
MOUNTING
5.2
Probe alignment to flow direction
For optimum measurement accuracy, make sure that the arrow on the bottom shell of
the sensor is aligned in the direction of flow.
1
2
Fig. 7:
Probe alignment to the flow direction
1
Arrow on the bottom shell of the housing
2
Flow direction
NOTE
For different installation conditions or a different probe alignment, the measurement
accuracy cannot be maintained.
5.3
Probe alignment for empty pipe detection
For optimum empty pipe detection, make sure that the sensor is installed laterally in
the pipeline and that the medium can flow off the sensor tip well. The pipe will only be
detected as empty if the probe is uncovered and free of debris.
45°
45°
45°
45°
Fig. 8: Alignment of the T-Easic
®
for empty pipe detection.
