SICK T-EASIC FTS Operating Instructions Manual Download Page 52

Page: 52 / 72

O P E R A T I N G I N S T R U C T I O N S | T - E A S I C

8023072/1E22/2022-02-23 | SICK AG

Subject to change without notice

5 2

REPAIR

Repair

Repair work on the sensor may only be performed by qualified and authorized per

sonnel from SICK AG. Tampering with or modifying the sensor will void any warranty

claims against SICK AG.

9.1

Maintenance

The T-Easic

operates maintenance-free. We recommend that the following measures

be performed on a regular basis:

•

Check the measurement probe for deposits and wear.

•

Check the threaded and plug connections.

Repair work on the sensor may only be performed by qualified and authorized per

sonnel from SICK AG. Tampering with or modifying the sensor will void any warranty

claims against SICK AG.

9.2

Return

Rinse and/or clean the removed device before returning it to protect our employees

and the environment from dangers posed by residues of the material being measured.

Defective devices can only be examined if a completed return form is included. This

form includes information about all materials which have come into contact with the

device, including those which were used for testing purposes, operation, or cleaning.

The return form is available on our website (

www.sick.com

Summary of Contents for T-EASIC FTS









































































Search results

Summary of Contents for T-EASIC FTS

Reviews:

Related manuals for T-EASIC FTS

Brands by name

Popular brands

SICK T-EASIC FTS, Operating Instructions Manual

Search results

Summary of Contents for T-EASIC FTS

Reviews:

Related manuals for T-EASIC FTS

Brands by name

Popular brands