SICK LMS5 Series, Operating Instructions Manual

Page: 59 / 94

6.4.2 Connections of LMS511, LMS581 and LMS511 Heavy Duty
LMS511 Lite/PRO/Heavy Duty Outdoor, LMS581 PRO, LMS531 Lite/Pro: "Power” connection
Table 23: LMS511 Lite/PRO/Heavy Duty Outdoor, LMS581 PRO, LMS531 Lite/Pro: "Power” connection
Male/female connec‐
tor Contact Short form Signal description Wire colors connect‐
ing cable part no.
6036159
1.
1
4 3
5
2
Figure 41: M12 male
connector, 5-pin, A-
coded
1 V
S
Sensor supply voltage Brown
2 V
S
heat. Heating supply voltage White
3 GND Ground sensor Blue
4 Reserved Do not use! –
5 GND heat. Ground heating Black
1. Example values when using the specified connecting cable(s). Signal assignment and wire colors can vary when using other connecting
cables.
Required minimum voltage at flying leads for part no. 6036159: 20.3 V
LMS511 Lite/PRO/Heavy Duty Outdoor, LMS581 PRO and LMS531 Lite/PRO: “Ethernet” connection
Table 24: LMS511 Lite/PRO/Heavy Duty Outdoor, LMS581 PRO and LMS531 Lite/PRO: “Ethernet” connection
Male/female connector Contact Short form Signal description
1
4 3
2
Figure 42: M12 female con‐
nector, 4-pin, D-coded
1 TX+
2 Rx+ R
3 TX– Sender–
4 Rx– Receiver–
LMS511 Lite Outdoor: “Data” connection
Table 25: LMS511 Lite Outdoor: Pin assignment of the “Data” connection
Male/female connector Contact Short form Signal description Wire colors connect‐
ing cable part no.
6036153
1.
1
7
2
6
3
4
5
8
Figure 43: M12 male connec‐
tor, 8-pin, A-coded
1 RD–/RxD RS-422/RS-232 receiver White
2 TD–/TxD RS-422 / RS-232 sender Brown
3 RD+ RS-422 receiver Green
4 TD+ RS-422 sender Yellow
5 GND RS RS-422/RS-232 ground Gray
6 Reserved Do not use! Pink
7 IN Sync Synchronization input Blue
8 GND IN Sync Synchronization ground Red
1. Example values when using the specified connecting cable(s). Signal assignment and wire colors can vary when using other connecting
cables.
ELECTRICAL INSTALLATION
6
8013796/1ALS/2021-03 | SICK O P E R A T I N G I N S T R U C T I O N S | LMS5xx 59
Subject to change without notice