About this document
6
© SICK AG · Germany · All rights reserved · Subject to change without notice
8012471/ZN27/2017-06-09
Operating Instructions
LMS1xx Laser Measurement Sensors
Chapter
1
Simplified device designation in the document
Below, the LMS1xx laser measurement sensor is referred to in simplified form as "LMS1xx".
The exceptions are where distinction between device variants is required because of the
technical features or functions are different. In this case the complete type designation (e.g
LMS10x) is used.
1.2.2
Software versions
Access to the LMS1xx via the SOPAS ET configuration software is password protected.
For details see
section “Interactive configuration using SOPAS ET” on page 84
LMS12x/LMS13x/LMS14x Security and LMC12x/LMC13x VdS (object protection)
Access to these devices via the SOPAS ET configuration software is described in the
document ”Technical Information (installer instructions VdS)”, part no.: 8013749, issue in
English.
Please see
section 1.5 “Further information” on page 9
Software/tool
Function
State
LMS10x/LMS11x/LMS15x
Firmware
From V 1.40
LMS12x/LMS173/LMS13x/
LMS182
LMC12x/LMC13x
Firmware
FromV 1.11
LMS14x
Firmware
From V 01.30
LMS10x/LMS11x/LMS15x
Device specific software module for SOPAS
ET (device description: *.sdd file)
FromV 01.14.00
LMS12x/LMS173/LMS13x/
LMS182
Device specific software module for SOPAS
ET (device description: *.sdd file)
From V 01.11.00
LMS14x
Device specific software module for SOPAS
ET (device description: *.sdd file)
From V 01.30.00
LMC12x/LMC13x
Device specific software module for SOPAS
ET (device description: *.sdd file)
From V 01.00.00
SOPAS ET
Configuration software
From V 02.32 or
from V 3.00 (new
grafical user interface
and functions)
Tab. 2:
Software versions
