Operating Instructions
LMS1xx Laser Measurement Sensors
About this document
8012471/ZN27/2017-06-09
© SICK AG · Germany · All rights reserved · Subject to change without notice
5
Chapter
1
1
About this document
1.1
Information regarding the operating instructions
These operating instructions provide important information on how to handle laser
measurement sensors from SICK AG.
Prerequisites for working safely are:
Adherence to all the specified safety instructions and guidelines.
Complying with any local work safety regulations and general safety specifications
applicable to the use of the laser measurement sensors.
These operating instructions are intended for specialists and electricians.
Important
Read these instructions carefully before starting any work on the device to familiarize
yourself with the LMS1xx laser measurement sensor and its functions.
The operating instructions are considered a part of the device and must be kept in an
accessible location in the immediate vicinity of the LMS1xx at all times, optimally in printed
format. Should the device be passed on to a third party, these operating instructions should
be handed over with it.
These operating instructions do not provide information on operating the machine in which
the laser measurement sensor is integrated. For information about this, refer to the
operating instructions of the respective machine.
1.2
Scope
These operating instructions are designed to address the technical personnel in regards to
safe mounting, electrical installation, commissioning and configuration and maintenance of
the following laser measurement sensor variants.
A step-by-setp approach is taken for all tasks.
1.2.1
LMS1xx variants
These operating instructions apply to the following variants:
LMS12x/LMS13x/LMS14x Security and LMC12x/LMC13x VdS (object protection)
You will find further information on theses devices in the document ”Technical Information
(installer instructions VdS)”, part no.: 8013749, issue in English.
Please see
section 1.5 “Further information” on page 9
LMS1xx variant
Range of use/purpose
LMS100
Indoor
LMS111
Outdoor
LMS151/LMS153
Outdoor, with extended functionality
LMS121/LMS122/LMS123/LMS173 Security
Indoor, for object protection systems
LMS131/LMS132/LMS133/LMS141 Core/
LMS141 Prime/LMS182 Security
Outdoor, for object protection systems
LMC121/LMC122/LMC123 VdS
Indoor, for VdS object protection systems
LMC131/LMC132/LMC133 VdS
Semi-Outdoor, for VdS object protection systems
Tab. 1:
Variants of the LMS1xx laser measurement sensor
