SICK LMC121, Operating Instructions Manual

Page: 56 / 110

Mounting
56
© SICK AG · Germany · All rights reserved · Subject to change without notice
8012471/ZN27/2017-06-09
Operating Instructions
LMS1xx Laser Measurement Sensors
Chapter 5
5.2.4 Select mounting location
Risk of dysfunction due to overheating or dazzle!
Direct sunlight can increase in the temperature inside the LMS1xx in an inadmissible way.
 Mount the LMS1xx such that it is not exposed to direct sunlight (if necessary fit canopy).
 To avoid a dazzle by the device itself, do not install the device with view of glass or
stainless steel surfaces.
5.3 Mounting steps
Special features to note during mounting:

Mount the LMS1xx such that it is protected from moisture, dirt and damage.

Ensure that the entire field of view of the LMS1xx is not restricted.

Mount the LMS1xx such that the indicators are easy to see.

Always mount the LMS1xx so that there is still enough space for mounting and removing
the system connector.

Avoid excessive shock and vibration loading on the LMS1xx.

In applications with heavy vibration, prevent the fixing screws from coming loose by
using screw locking devices (see
section 10.1 “Data sheet LMS1xx/LMC1xx laser
measurement sensor” on page 91 ).

Regularly check the tightness of the fixing screws.

Pay attention to the maximum torque of the M5 fixing screws on the LMS1xx of max.
5.9 Nm.
The LMS1xx can be fastened in the following ways:
Mounting
Remark For mounting see ...
Direct mounting Without mounting kit Fig. 30 on page 57
With mounting kit 1a (part no. 2034324) or

kit 1b (part no. 2034325)
Fig. 31 on page 58 and
Fig. 32 on page 58
With mounting kit 2 (part no. 2039302) and

kit 3 (part no. 2039303)
Only in conjunction with mounting kit 1a or 1b Fig. 33 on page 59
With weather protection hood 190°

(part no. 2046459)
+ standard mounting kit (part no. 2046025) Fig. 34 on page 60

Fig. 36 on page 61
+ quick-action mounting kit (part no. 2046989) Fig. 37 on page 61
With weather protection hood 270°

(part no. 2046458)
+ standard mounting kit (part no. 2046025) Fig. 35 on page 60

Fig. 36 on page 61
+ quick-action mounting kit (part no. 2046989) Fig. 37 on page 61
Tab. 17: Mounting options for the LMS1xx