SICK LMC121 Operating Instructions Manual Download Page 60

Page: 60 / 110

Mounting

8012471/ZN27/2017-06-09

Operating Instructions

LMS1xx Laser Measurement Sensors

Chapter

5.3.4

Mounting the LMS11x/LMS13x/LMS14x/LMS15x/LMS182 with weather
protection hood

To protect the LMS11x/LMS13x

LMS14x

LMS15x/LMS182 from glare and precipitation

when used outside, two weather protection hoods are available.



The weather protection hood 190° provides a field of view of 190° and practically flat
mounting on the application.



The weather protection hood 270° provides a larger field of view of 270°, but not flat
mounting on the application.
You will find detailed dimensions in

section 10.3.4 “Dimensional drawings weather

protection hoods” on page 103

Important

The LMC12x and the LMC13x cannot be fastened with a weather protection hood.

Fig. 34:

Weather protection hood 190°(part no. 2046459)

Fig. 35:

Weather protection hood 270°(part no. 2046458)

Weather protection hood

LMS11x



LMS13x



LMS14x



LMS15x



LMS182

Weather protection hood

LMS11x



LMS13x



LMS14x



LMS15x



LMS182

Summary of Contents for LMC121














































































































Search results

Summary of Contents for LMC121

Reviews:

Related manuals for LMC121

Brands by name

Popular brands

SICK LMC121, Operating Instructions Manual

Search results

Summary of Contents for LMC121

Reviews:

Related manuals for LMC121

Brands by name

Popular brands