Inductive load
NOTE
Provide an arc-suppression switch at the digital output if inductive load is present.
b
Attach a freewheeling diode directly to the load for this purpose.
Table 24: Assignment of placeholders to the digital outputs
Device
CDB650-204
Output A
Pin B
Signal C
Terminal D
Result 1
13
RES/OUT 1
20
Result 2
14
RES/OUT 2
21
Result 3
16
RES/OUT 3
50
Result 4
17
RES/OUT 4
51
Characteristic data of the digital outputs
Table 25: Characteristic data of the digital outputs “Result
1” to “Result
4”
Type
Switching
Switching behavior
PNP switching to supply voltage V
S
Default settings in the device: no function, logic: not inverted (active
high)
Properties
•
Short-circuit pro temperature protected
•
Not electrically isolated from V
S
Electrical values
0 V ≤ V
out
1)
≤ V
S
(V
S
−1.5 V) ≤ V
out
≤ V
S
at I
out
2)
≤ 100 mA
1)
Output voltage.
2)
Output current.
NOTE
Assign the functions for the digital outputs in the device using a configuration tool, e.g.
the configuration software SOPAS ET.
13.2.10
Wiring the external digital outputs of the device in the CDB650-204
Device = Lector64x = V2D64xx-xxxxYx (Y = A, B or S)
Device = Lector65x = V2D653xx-xxxxYx (Y = A, B or S)
13
ANNEX
78
O P E R A T I N G I N S T R U C T I O N S | Lector64x/65x Flex, Lector65x Dynamic Focus
8016185/19E9/2020-10-21 | SICK
Subject to change without notice
