NOTE
Capacitive loads on the digital outputs have an effect on the switch-on and switch-off
behavior. A maximum capacitance of 100 nF is the limit value.
Function assignment
NOTE
Assign the functions for the digital outputs in the device using a configuration tool, e.g.
the configuration software SOPAS ET.
Extension: additional logical digital outputs in the device for physical external digital
outputs on the optional connection module
Thanks to the optional CMC600 parameter cloning module in combination with the CDB
or CDM connection module, the two digital outputs “External output 1” and “External
output 2” are additionally available at the relevant terminals of the connection module.
NOTE
The external digital outputs are software-controlled and therefore do not offer the same
timing precision as physical digital outputs. The external digital outputs may not be
suitable for time-critical applications.
For the electrical characteristic data of the two external digital outputs, see the respec‐
tive connection diagrams for the connection modules in these operating instructions.
Wiring the digital outputs of the device via a connection module:
Connection mod‐
ules
Digital outputs
Reference
CDB650-204
"RES/OUT 1"
"RES/OUT 2"
"RES/OUT 3"
"RES/OUT 4"
see "Wiring digital outputs of
the device in the CDB650-204",
page 77
External output 1 (“EXT. OUT 1”)
External output 2 (“EXT. OUT 2")
see "Wiring the external digital
outputs of the device in the
CDB650-204", page 78
CDM420-0006
"Result 1"
“Result 2”
see "Wiring digital outputs of
the device in the CDM420-0006",
page 91
External output 1 (“AUX Out 1”)
External output 2 (“AUX Out 2”)
see "Wiring the external digital
outputs of the device in the
CDM420-0006", page 92
ELECTRICAL INSTALLATION
6
8016185/19E9/2020-10-21 | SICK
O P E R A T I N G I N S T R U C T I O N S | Lector64x/65x Flex, Lector65x Dynamic Focus
45
Subject to change without notice
