Status indicators
Table 4: First display level
Display
LED
Color
Status
Ready
O
Green
Device ready
O
Red
Hardware or software error
Result
O
Green
Read operation successful
O
Red
Read operation unsuccessful
Light
O
Green
Operation: Illumination on, internal trigger active
Funct
O
Green
Function can be defined by user
O
Yellow
Function can be defined by user
O
Blue
Function can be defined by user
O
Red
Function can be defined by user
O
= illuminated;
Ö
= flashing
PROFINET operation (single port)
The
Ready
status LED signals the device status in the PROFINET network.
Table 5: Device status in the PROFINET network (first display level,
Ready
status LED)
Ready
LED
Device status
Remarks
Green com‐
ponents
Red compo‐
nents
O
o
Device is ready for use.
O
Ö
Red compo‐
nents flash
cyclically
The device status in
the PROFINET network
depends on the flashing
frequency of the red LED
components.
Flashes
every 7 sec‐
onds
Network detection in the
device is active.
After switching on, the device detects
a PROFINET network and activates
the PROFINET protocol. The duration
of network detection can be config‐
ured in SOPAS ET (default: 3 min‐
utes). Network detection can be
deactivated in SOPAS ET.
Flashes
every
0.5 seconds
PROFINET is activated in
the device. The device is
not connected to the PLC
or the device is not config‐
ured.
Ö
Ö
PROFINET is activated in
the device.
Prerequisite: the “Flashing” function
was activated for the device in the
configuration software of the PLC
(device identification).
O
= lights up;
Ö
= flashes;
o
= does not light up
Table 6: Second display level
Display
LED
Color
Status
Tst
(Test)
O
Blue
Test (reading diagnostics) selected
Ö
Blue
Test started
3
PRODUCT DESCRIPTION
18
O P E R A T I N G I N S T R U C T I O N S | Lector64x/65x Flex, Lector65x Dynamic Focus
8016185/19E9/2020-10-21 | SICK
Subject to change without notice
