7.6.2.6.5
Multi enable V1
Overview
Each input of the function block is separately linked to the
Release
input via AND logic. If
Input n
and the
Release
input = 1, then
Output n
= 1.
Principle of operation
Table 103: Inputs
Input
Description
Input 1
Data type: Boolean
Input 2 … Input 8
(optional)
Release
Data type: Boolean
Table 104: Outputs
Output
Description
Output 1 … Output 8
Data type: Boolean
If
Input n
and the
Release
input = 1, then
Output n
= 1
Table 105: Parameter
Parameter
Description
Available inputs
1 … 8
Inverted
You can individually invert any visible input. At an inverted input, a 0
works internally in the same way as a 1 and vice versa.
7.6.2.6.6
Multi latch V1
Overview
Depending on the
Set
input, the status of up to 8 inputs can be forwarded or saved at
the respective outputs.
Principle of operation
Table 106: Inputs
Input
Description
Input 1
Data type: Boolean
Input 2 … Input 8
(optional)
Set
Data type: Boolean
Depending on the Inversion parameter, a rising or a falling signal edge
saves the current status of inputs 1 ... 8 at the
Set
input. The function
block also saves the statuses of the inputs when the
Set
input is
already 1 in the first logic cycle.
Table 107: Outputs
Output
Description
Output 1 … Output 8
Data type: Boolean
•
If the
Set
input = 0, the function block forwards the status of the
inputs to the corresponding outputs unchanged.
•
If the
Set
input changes from 0
→
1, the function block saves the
current status of inputs 1 … 8. The function block outputs the saved
status to the outputs as long as the
Set
input = 1. The status change
of inputs 1 … 8 does not influence the outputs as long as the
Set
input = 1.
CONFIGURATION
7
8024589/2020-11-10 | SICK
O P E R A T I N G I N S T R U C T I O N S | Flexi Compact
91
Subject to change without notice