![background image](http://html.mh-extra.com/html/sick/flexi-compact/flexi-compact_operating-instructions-manual_1264303124.webp)
Further topics
•
•
•
"Diagnostics using Safety Designer", page 124
11.3
Diagnostics using Safety Designer
Prerequisites
•
The safety controller must be connected to Safety Designer.
Diagnostics
area
The main navigation menu has a
Diagnostics
area. This area contains the following
functions:
•
Error history main module
: Displays all messages, information, warnings, and error
messages of the safety controller.
11.3.1
Error history
Error history
Table 136: Error history information
Keyword
Description
Type
Error type (e.g., information, warning, recoverable error, serious error)
Occurrence
Operating time between when the main module was last switched
on and when the error occurred (power-on cycles of the main mod‐
ule/days:hours:minutes:seconds)
Local time of
occurrence
Time when the error occurred (system time of the computer).
This value is not displayed for historical errors.
Site
Module position and type code of the module that detected the error
Error code
Hexadecimal error code
Support info
Internal information about the error
Message
Description of the fault that occurred
Acknowledged
The error has been marked as viewed
Reason
Detailed information on the cause of the error
Solution
Suggested solution for eliminating the error
Complementary information
Clicking an entry in the list selects that entry and displays the details of the selected
message.
The diagnostic messages are also included in the report. You can use the report to save
or print out the diagnostic messages.
Further topics
•
"Report main navigation menu", page 112
11
TROUBLESHOOTING
124
O P E R A T I N G I N S T R U C T I O N S | Flexi Compact
8024589/2020-11-10 | SICK
Subject to change without notice