Output
Description
Muting lamp
Data type: Boolean
The
Muting lamp
output can be used to indicate when a muting cycle is
active.
•
The
Muting lamp
output = 0 if the
Muting status
output = 0
•
The
Muting lamp
output = 1 if the
Muting status
output = 1 or the
Override status
output = 1
•
The
Muting lamp
output pulsates at 2 Hz if the
Override required
output
= 1
Muting status
Data type: Boolean
The output indicates the status of the muting function.
•
The
Muting status
output = 0 if the muting cycle is inactive (no error)
or a muting error has been detected
•
The
Muting status
output = 1 if the muting cycle is active (no error) or
override is active (no error)
Override required
Data type: Boolean
Muting error
Data type: Boolean
"Output Muting error", page 103
Override status
Data type: Boolean
Status
Data type: Boolean
•
0 = Error
•
1 = No error
The value at the output is the inverted value of the
Muting error
output.
Table 114: Parameter
Parameter
Description
Direction detection
•
Disabled
•
Forward (A1 / A2 first)
•
Backward (B1 / B2 first)
"Parameter Direction detection", page 104
Condition of the other sen‐
sor pair for muting start
•
Both sensors clear
•
At least one sensor clear
"Parameter Condition of the other sensor pair for muting start",
page 105
Condition for end of muting
•
With muting sensor pair
•
With electro-sensitive protective device (ESPE)
"Parameter Condition for end of muting", page 105
Total muting time
0 = infinite, 5 s … 3,600 s, adjustable in 1 s increments
"Parameter Total muting time", page 104
Concurrency monitoring
time
0 = infinite, 10 … 3,000 ms, adjustable in 10 ms increments. If
the value is not 0, it must be greater than the logic execution time.
"Parameter Concurrency monitoring time", page 104
7
CONFIGURATION
96
O P E R A T I N G I N S T R U C T I O N S | Flexi Compact
8024589/2020-11-10 | SICK
Subject to change without notice
