![background image](http://html.mh-extra.com/html/sick/flexi-compact/flexi-compact_operating-instructions-manual_1264303140.webp)
Address
Contents
Data type
Size
3060
Description
STRING
50 words (100 bytes)
1)
The first 32 bytes contain the module statuses of the CPU. This is followed by 8 byes each for the module
statuses of the expansion modules. The order depends on the hardware configuration. The content
depends on the type of expansion module.
Description of the device status
Table 162: Device status
Value
Device status
Description
0
Unknown State
No supply voltage
1
Start-up
Self-test is in progress or the safety controller is being
initializing.
2
Service Mode
Configuration is being transferred to the device. Configu‐
ration data are being saved in the SmartPlug.
3
Normal Operation
Application is running.
4
Suspended Operation
Application is ready to run.
6
Service Required
•
SmartPlug not inserted or incompatible with this
module.
•
Configuration is invalid.
7
Recoverable Error
Application is running.
A recoverable external error is present at this module.
8
Fatal error
The application was stopped. All outputs of the safety
controller are switched off.
Description of the required user actions
Table 163: Required user action
Bit
Required user action
0x00 01
Confirm configuration
0x00 02
Check configuration
0x00 08
Check application interface
0x00 10
Checking the device
0x00 20
Perform set-up procedure
0x00 40
Checking the firmware
0x00 80
Waiting
Description of the product codes
Product codes are 4-byte coded device type codes.
Table 164: Product codes
Product codes
Description
0x30 01 00 00
CPUc1 main module
0x31 01 00 00
CPUc2 main module
0x00 05 00 00
EtherCAT gateway expansion module
0x00 06 00 00
PROFINET gateway expansion module
0x30 0B 00 00
XTDI IO expansion module
0x30 0C 00 00
XTDO IO expansion module
0x30 FF 00 00
SmartPlug
13
TECHNICAL DATA
140
O P E R A T I N G I N S T R U C T I O N S | Flexi Compact
8024589/2020-11-10 | SICK
Subject to change without notice