![background image](http://html.mh-extra.com/html/sick/flexi-compact/flexi-compact_operating-instructions-manual_1264303112.webp)
7.6.11.6
Removing visibility protection from a logic page
Approach
1.
Open the desired page in the
Logic editor
view.
2.
Right-click on the page and select the
Remove page visibility protection...
command
from the context menu.
3.
Enter the relevant password where applicable and click on
Log in
.
7.7
Report main navigation menu
The report summarizes all information about the configuration of the safety controller.
You can select or deselect parts of the report. You can also export a parts list as a CSV
file.
7.8
Service main navigation menu
Overview
You can run the following under service:
•
Reboot device
•
Reset the device to factory settings
•
Managing passwords
Prerequisites
•
Existing connection between the configuration software and device
7.9
Establishing a connection
Overview
To read a configuration from the device or transfer a configuration to the device, it is
necessary to establish a connection between the configuration software and the safety
controller.
Approach
1.
Check whether the safety controller is connected correctly.
2.
Click on
Connect
in the toolbar.
✓
The configuration software establishes the connection to the safety controller.
Complementary information
When a connection to the safety controller is established, the configuration software
changes to online mode. In online mode, the configuration software displays individual
statuses (online monitoring) in the logic editor, e.g., of the inputs and outputs.
7.10
Transferring the configuration
Important information
NOTE
When transmitting the configuration, the protective device’s existing configuration may
be overwritten.
Prerequisites
•
Existing connection between the configuration software and device
7
CONFIGURATION
112
O P E R A T I N G I N S T R U C T I O N S | Flexi Compact
8024589/2020-11-10 | SICK
Subject to change without notice