![background image](http://html.mh-extra.com/html/sick/ethercat-sig350/ethercat-sig350_operating-instructions-manual_1264333062.webp)
If a user other than “Run” is selected, the corresponding password must also be
entered.
Note
Saving the user in a web browser may depend on the cookie settings.
When logging in for the first time, you will be prompted to change the default password.
In the interest of cybersecurity, it is strongly recommended that you create a new, differ‐
ent password. Please remember this password. If you have forgotten your password, it
cannot be reset. Please contact your SICK service partner for what to do in this case.
Table 25: User and default passwords
User
Default password
Role description
Operator
No password required
Reading parameterization
Maintenance
Main
Reading and writing parame‐
terization
Service
Service level
Performing advanced settings
like firmware updates.
8.3.3
Forgotten password
If an individually created password has been forgotten, the default passwords can be
restored with the aid of a factory reset using the corresponding rotary switch combina‐
tion on the device.
8
OPERATION
62
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
8027836./2022-06-10 | SICK
Subject to change without notice