![background image](http://html.mh-extra.com/html/sick/ethercat-sig350/ethercat-sig350_operating-instructions-manual_1264333037.webp)
8.1.2
Function blocks
8.1.2.1
SICK function block
With the
Function Block Factory
digital software service, SICK is providing a unique
possibility of generating specific PLC function blocks that go far beyond the range of
performance of Siemens function blocks. Further information about the exchanged
data and the connected devices is available here.
Function blocks for any IO-Link device (manufacturer-independent) can be generated
individually via the Function Block Factory. These function blocks are fully tested and
documented. They considerably facilitate and accelerate PLC programming and prevent
errors. This can save time and money in production processes.
Additional information on the Function Block Factory from SICK can be found on the
homepage:
www.sick.com/functionblockfactory
8.1.3
Ethernet over EtherCAT (EoE)
The SIG350 supports Ethernet over EtherCAT. For this purpose, a valid DNS name and a
valid IP address must be entered as shown in the following figure:
OPERATION
8
8027836./2022-06-10 | SICK
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
37
Subject to change without notice