![background image](http://html.mh-extra.com/html/sick/ethercat-sig350/ethercat-sig350_operating-instructions-manual_1264333058.webp)
This page is divided into three areas.
•
In the left area the identification data, information about the firmware and soft‐
ware versions as well as the vendor information of the module are displayed.
•
In the middle there is a compact image of the SIG350, which shows for each
port the deviceAlias and the light behavior of the corresponding LEDs. The corre‐
sponding light behavior indicates how the respective port is configured (details
)
•
The parameterization of the individual ports is clearly displayed on the right
side. In addition to the settings of pin 2 and pin 4, the deviceAlias, the current
consumption and the communication status can also be read out. This overview
corresponds to the configuration as it has been made on the “Ports” tab.
NOTE
Note that the LED displays do not work in real time.
“Connection options” tab
On the “Connection options” tab, the Ethernet settings such as the IP address or the
subnet mask can be changed. In addition, additional fieldbus information is displayed.
NOTE
To activate the Ethernet parameter changes, the device must be switched off and on
once.
8
OPERATION
58
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
8027836./2022-06-10 | SICK
Subject to change without notice