For some parameterization functions, it may be necessary to activate the edit option
first. These functions are marked by a pencil. The corresponding entry can be changed
by clicking on the pencil:
When configurations are changed in the module, these changes are implemented
immediately. Manual saving of changes is not required.
However, there are some functions that require the changes made to be actively
transmitted to the module. This is represented by a blue button directly below the
corresponding input area.
This is necessary, for example, when writing process data to the device. Whether the
process was successful is reported back directly via a message at the upper right edge
of the web interface. This message disappears automatically after a few seconds.
8
OPERATION
56
O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350
8027836./2022-06-10 | SICK
Subject to change without notice