SICK EtherCAT SIG350 Operating Instructions Manual Download Page 24 | Manualshive

Page: 24 / 76

background image

7

Commissioning

When the supply voltage is switched on for the first time, the SIG350 starts with the
factory settings.

To enable parameterization, the module must be configured to suit the network environ‐
ment. For this purpose, various preparatory measures must be taken before parameter‐
ization can be started.

7.1

IP address

The module requires an IP address so that it can be addressed via the Ethernet
network.

NOTE

When delivered, the SIG350 has the default IP address:

192.168.0.1

and the subnet mask

255.255.255.0

The name when delivered is

sig350

.

NOTE

The SIG350 does not have an IP address when delivered and is in

BootP

mode.

The SIG350 supports the following methods for IP address assignment:

1

BootP

2

DHCP

3

Static

BootP

Protocol for assigning the IP address.

DHCP is deactivated by default. To activate DHCP, open the web browser and change
the address mode from static to DHCP. As soon as DHCP is activated, the IO-Link
Master attempts to obtain an address from a DHCP server. When a new IP address is
assigned by a DHCP server, the module immediately switches to the new IP address.
Alternatively, DHCP can also be activated via the rotary switches.

DHCP

The SIG350 IO-Link Master supports the Dynamic Host Configuration Protocol for
assigning IP addresses.
DHCP is deactivated by default. To activate DHCP, open the web browser and change
the address mode from static to DHCP.
As soon as DHCP is activated, the IO-Link Master attempts to obtain an address from
a DHCP server. When a new IP address is assigned by a DHCP server, the module
immediately switches to the new IP address.
Alternatively, DHCP can also be activated via the rotary switches.

Static

The module has rotary switches with which the last octet of the IP address can be
adjusted manually. In the Ethernet configuration area of the web interface, the default
IP address can also be changed statically.

7

COMMISSIONING

24

O P E R A T I N G I N S T R U C T I O N S | Sensor Integration Gateway - SIG350

8027836./2022-06-10 | SICK

Subject to change without notice

«
...
22
23
24
25
26
...
»

Summary of Contents for EtherCAT SIG350













































































Reviews:

No comments

Related manuals for EtherCAT SIG350

Brand: XAVI Technologies Corp. Pages: 51

Brand: Rath Pages: 2

Brand: Alphatech Pages: 16

PVSG-IQAN-C2E1M2W1U1

Brand: Parker Pages: 70

Brand: Gree Pages: 12

V-NET PLNWKB000

Brand: LG Pages: 19

Brand: LG Pages: 23

V-NET PLNWKB000

Brand: LG Pages: 183

Brand: LG Pages: 11

Brand: ABB Pages: 22

Brand: IBM Pages: 58

VoiceFinder AP-MG3000N

Brand: AddPac Pages: 36

Brand: Adcon Pages: 366

Brand: Fanvil Pages: 5

Brand: Vonamic Pages: 32

Brand: Bang & Olufsen Pages: 58

Brand: Adeunis RF Pages: 20

Hitron CODA-4582

Brand: Ritter Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands