SICK DT35S, Operating Instructions Manual, Page: 33 / 64

Figure 21: Double safety-related zone
Figure 22: Observation window
Setting Description
Behavior of digital
output The “Switching behavior” setting can be used to manually select whether
the output should relate to the Double safety-related Zone (
see figure 21,
page 33 ) or Observation window ( see figure 22, page 33 ).
When the switching behavior is changed, the values set for switching
point 1 and switching point 2 are automatically swapped by the device.
Switching point 1 • With the “Switching point 1” setting, the first of the two switching
points of the switching window can be set manually in millimeters.
• The first of the two switching points can be taught in for the Switching
window (
Window mode ) switching mode using the “Switching point 1”
teach method.
For Double safety-related zone ( see figure 21, page 33 ), “Switching point 1”
must be taught in first, for Observation window ( see figure 22, page 33 ),
“Switching point 2” must be taught in first to avoid switching the behavior
twice during teach-in.
COMMISSIONING AND CONFIGURATION
7
8027663//2022-08-04 | SICK O P E R A T I N G I N S T R U C T I O N S | DT35S 33
Subject to change without notice