•
Switching point:
15000 mm
•
Hysteresis:
25 mm
7.3.3.1
DtO Mode
The DtO mode can be configured via the switching function for Q1 and Q2. The digital
output can be parameterized for the
Safety-related Zone near
or
Safety-related Zone far
behavior. The necessary settings can either be taught-in or set manually. These are
described in the following.
For a detailed functional description,
see "Safety-related functions", page 16
.
NOTE
The switching point can only be set in the valid measuring range from 50 mm to
15,000 mm.
When switching between the “Distance to object” (
DtO mode
) switching function and the
“Switching window” (
Window mode
) switching function, it is possible for the setting of the
previously selected switching behavior and/or the switching point setting to change.
Figure 19: Safety-related Zone near
Figure 20: Safety-related Zone far
COMMISSIONING AND CONFIGURATION
7
8027663//2022-08-04 | SICK
O P E R A T I N G I N S T R U C T I O N S | DT35S
31
Subject to change without notice