O P E R AT I N G I N S T R U C T I O N S |
Bulkscan LMS511
8014829/ZNC5/2017-06-06 |
S I C K
Subject to change without notice
8 4
APPENDIX
Variable name
Description
Variable
type
Value range
Unit
parLevelCompensation
Level for raising or
lowering the conveyor
belt level
int_8
–100 to 100
mm
Permissible commands:
sMN
Method name
Description
BsMeasure
Start the Measuring mode
BsMaintenance
Start the Maintenance mode
BsTeach
Start the teach-in process
BsLevelCompensation
Apply level compensation
13.1.6
Measured values
Permissible commands:
sRN, sEN
Variable name
Description
Variable
type
Value range
Unit
mvVolumeFlow
Volume flow rate
float_32
m³/h
mvMassFlow
Mass flow rate
float_32
t/h
mvVolumeSum
Volume sum
float_32
m³
mvMassSum
Mass sum
float_32
t
mvGravity
Center of gravity
float_32
0 to 1
mvHeight
Bulk height
float_32
m
mvDensity
Bulk density
float_32
t/m³
mvSpeed
Belt speed
float_32
m/s
Permissible commands:
sMN
Method name
Description
BsClearTotals
Reset measured values (volume sum, mass sum)
13.1.7
Measurement
Permissible commands:
sRN, sWN
Variable name
Description
Variable
type
Value range
Unit
parSpeedSource
Belt speed: Source
uint_8
0: Fixed value
1: Encoder
2: Analog value
parFixedSpeed
Belt speed (fixed value)
float_32
–30 to +30
m/s
parUseBeltMoving
Use status signal for the
belt operation
bool_1
0: Deactivated
1: Active
DI1Logic
Logic of the status signal
for the belt operation
uint_8
0: Active high
1: Active low
LICencres
Encoder: Resolution
float_32
0.001 to 2000
mm/Inc
