O P E R AT I N G I N S T R U C T I O N S |
Bulkscan LMS511
8014829/ZNC5/2017-06-06 |
S I C K
Subject to change without notice
6
ABOUT THIS DOCUMENT
1
About this document
Please read this chapter carefully before you begin working with this documentation
and the Bulkscan LMS511.
1.1
Purpose of this document
These operating instructions guide the technical personnel during the safe mounting,
electrical installation, configuration and commissioning as well as during the mainte
-
nance of the laser volume flowmeter Bulkscan LMS511, referred to for short as the
Bulkscan in the following.
1.2
Target group
These operating instructions are intended for planning engineers, developers and
operators of plants and systems in which the Bulkscan is to be used. They are also in-
tended for people who integrate the Bulkscan into a machine, initialize its use, or who
are in charge of servicing and maintaining the device.
1.3
Information depth
These operating instructions contain information about the Bulkscan on the following
topics:
◦
Product description.
◦
Mounting.
◦
Electrical installation.
◦ Commissioning and configuration.
◦
Care and maintenance.
◦
Fault diagnosis and troubleshooting.
◦
Conformity and approval.
When planning and using sensors such as the Bulkscan, specific technical skills are
required that are not covered by this documentation.
When operating the Bulkscan, the national, local and statutory rules and regulations
must always be observed.
You can find further information on the Bulkscan online at www.sick.com.
1.4
Scope
These operating instructions are original operating instructions.
These operating instructions are referring to the following software versions:
Component
Function
Version
LMS511-20190
Firmware
V2.20
SOPAS Single Device
Configuration software
3.3.1
For a table overview of user levels and passwords, see Chapter 7.1.2 Establishing com-
munication with the bulk scan.
Note:
Note:
