O P E R AT I N G I N S T R U C T I O N S |
Bulkscan LMS511
8014829/ZNC5/2017-06-06|
S I C K
Subject to change without notice
3 1
MOUNTING
5.3.1
Direct mounting
The Bulkscan has four M6×8 threaded holes on the rear. They can be used to mount
the Bulkscan directly on the intended mounting surface.
M x 8
Fig. 10: Direct mounting
During mounting, observe the dimensional drawings (see "11.3 Dimensional drawings“
5.3.2
Mounting with mounting kit 1
You can use mounting kit 1 to mount the Bulkscan on a mounting surface (wall, ma-
chine).
Mounting kit 1
Fixing screws
M8 x 9
threaded holes
Fig. 11: Mounting with mounting kit 1
Note
